The ice manufacturer line to my fridge presently doesn’t have shutoff valve and I also’d love to include one but i can not determine just what size the connector is

The ice manufacturer line to my fridge presently doesn’t have shutoff valve and I also’d love to include one but i can not determine just what size the connector is

we bought a 1/4 inches valve because the ice manufacturer connector We have says 1/4 FCM it did not fit on it but. It appears similar to 1/8 inches, however a 1/8 inches valve does not fit either, though it is quite near. Where could I find information regarding water pipeline sizes, there should be some standard?

The copper water line i will be linking it to has got the precise measurement that is same the fridge.

MODIFY:

Okay I was thinking that looking the net for 1/4″ OD Valve Male Female would get me personally the things I require but i will be getting no outcomes therefore I’ve reopened issue! Can anybody offer me personally an internet backlink to a product which will fit? I have added an image regarding the connection that is current i would ike to add the valve. Many Many Thanks!

3 Responses 3

You can find various criteria to pipelines and threads. Your problem is you want to mix two various standards that are threaded.

The ball valve which you connected to has nationwide pipeline threads (NPT). NPT are tapered plus it is the fact that taper that produces the seal between a female and male joint. No washers are expected.

What exactly is shown in your picture is compression fittings that have a right or thread that is running. The seal is created by either a ferrule or even a plastic washer.

The connection between the copper tube and the supply hose has been made as follows in your case

1/4″ Copper Tube > 1/4″ Compression by 1/4″ Compression Coupling > 1/4″ Supply Hose

The seal on a ferrule makes the copper tube that is positioned beneath the nut. Given that nut is tightened, the ferrule is compressed involving the coupling therefore the pipeline.

The seal on a rubber makes the supply hose side washer which will be frequently integral the the nut regarding the supply hose. (The compression coupling could have include two pea pea pea pea nuts, certainly one of that has been discarded given that supply hose has one integral.)

Therefore, to respond to your concern, you simply require a 1/4″ compression x 1/4″ compression valve that may change the coupling that is current. Listed here is a website link to this type of valve.

Do the paperwork is had by you that included the refrigerator? It will show the ice maker install and say the size maybe regarding the valve. We have constantly seen that it is 1/4″.

Where may be the water line tapped from? Frequently it comes down a 1/2″ copper pipeline. You can place your valve regarding the copper pipeline part.

EDIT: web web web Page 33 of this installation manual states that the water supply pipe is 1/4″ OD. You want a 1/4″ valve. Make sure there are not any burrs in the copper tubing after it is cut by you. Often you’ll want to register the sides. In the event that pipeline cutter isn’t razor- razor- sharp it may mushroom the ends and which will ensure it is appear that it’s maybe maybe maybe not the diameter that is right.

When you have additional time and cash, the advisable thing is to run either a 1/2 inches copper line or even a 1/2 galvanized line into the straight back of the ice box by having a 1/4 inches connection onto it, ideally set into the wall surface in synthetic field. An alternative cheaper way is always to run a 1/4 inches line through the 1/4 inches connection at your twin shut off valve using your destroy. Nonetheless, the copper line is really a difficult line and it gets crimped particularly when you or some other person is careless in going the refrigerator around to completely clean or any.

Making use of two crescent wrenches, here is what to complete in the event that you curently have a difficult copper line towards the straight back without a turn off valve anywhere in site. You should buy a kit with the right components you will need, 1/4 inches connectors having a 6 foot, 1/4 inches mail order bride supply hose, which includes the 1/4 pea pea nuts on both ends. Carefully take action your self or obtain a plumber to slice the copper line having a copper pipeline cutter, a good cut that is clean a handful of ins this part of where in actuality the line is released of wall surface or case (provided that it isn’t crimped, you are ok to cut it).

Place the free 1/4 inches nut on backwards from the pipeline, and so the nut covers the ferrel tucked in during the side of the final end regarding the pipeline, then, screw regarding the 1/4 inches connector/adjuster into it, using the 1/4 inches threads into the 1/4 inches nut from the hose, and tighten up, snug, never ever overbearing, ever with any plumbing system. Then link one other end of hose/nut to your threaded end on the fridge at the end, snug! Keep In Mind! nevertheless, a good thing to complete whenever you are linking a line to either a tap or ice box or in any case might be, just before put that final connection regarding the fridge, put that result in a huge bucket and turn it in to clear the type of atmosphere and grub, because that knows the length of time it has been sitting. Plus, if you have air when you look at the lines, that is a nother that is whole, trust in me you don’t desire! Have the fresh atmosphere away! You certainly can do all this your self too! don’t neglect to always check every thing for leakages! All the best! Now get commemorate you simply spared your self $150.

Add a Comment

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *